How to Setup Wii U on Elgato Game Capture

Thursday, 27 August 2015 0 comments

Elgato Game Capture HD60 connects to the Wii U using HDMI. It can passthrough video to a TV set also using HDMI. An HDMI cable is included in the box.

Inputs and Outputs






Elgato Game Capture HD60 has two inputs, and two outputs:

HDMI In

This connects to a game console or other video source. Signals protected by HDCP can't be used.

Analog Audio In

This connects to an analog audio source, using an 3.5mm cable. This is audio line in, and not a microphone port.

USB Out

This sends the H.264 encoded video to your computer via USB 2.0. The signal is delayed by a few seconds from live. The USB cable also powers the Elgato Game Capture HD60 hardware.

HDMI Out

This sends the HDMI signal in real time to a TV or display, so you can play your game normally.

Setup Steps

  • Download and install the Elgato Game Capture HD software, version 2.0 or higher:
  • https://www.elgato.com/en/game-capture-hd-support
  • Connect your Wii U to the HDMI In of Elgato Game Capture HD60 via an HDMI cable
  • Connect the HDMI Out of Elgato Game Capture HD60 to your TV or display via an HDMI cable.
  • Connect the Elgato Game Capture HD60 to your computer via a USB cable.
Troubleshooting - No Image Appears On The TV

If your TV only supports 1080i or 720p, and not 1080p, then you may not get a video image when Elgato Game Capture HD60 is first connected. The video may still appear in the software, but not on your TV.

The solution would be to set your Wii U to output video to 720p or 1080i - whatever format your TV can support.
Share this article :

Post a Comment

Related Posts Plugin for WordPress, Blogger...
 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. PML - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger